The 2013 Chevrolet Equinox is a popular SUV offering a smooth ride and efficient performance. Maintaining your Equinox involves regular maintenance, including oil changes. Understanding the correct oil capacity and type for your vehicle is crucial to ensure optimal engine health.

Engine Oil Capacity

The oil capacity of the 2013 Chevy Equinox varies depending on the engine type:

– 2.4-liter engine: Requires 4.7 liters (5 quarts) of SAE 5W-30 oil
– 3.6-liter engine: Requires 5.7 liters (6 quarts) of SAE 5W-30 oil

SAE 5W-30 is a recommended oil viscosity that provides year-round protection against wear and tear. It helps reduce friction, prevent corrosion, and maintain proper engine temperature.

Oil Change Intervals

Chevrolet recommends changing the oil in the Equinox every 7,500 miles or 6 months, whichever comes first. However, more frequent oil changes may be necessary in certain operating conditions, such as:

• Dusty environments
• Frequent towing
• Prolonged low-speed driving

Changing Oil for a 2013 Chevy Equinox 2.4L

Materials:

• 5 quarts of 5W-30 oil
• New oil filter (ACDelco PF63E or equivalent)
• Oil filter wrench
• 15mm socket wrench or wrench
• Drain pan
• Funnel

Instructions:

1. Preparation: Park the vehicle on a level surface and engage the parking brake. Allow the engine to cool for at least 30 minutes.

2. Drain the Oil: Locate the oil drain plug on the bottom of the oil pan. Place the drain pan underneath and use the socket wrench to loosen and remove the drain plug. Allow the oil to drain completely.

3. Replace the Oil Filter: Locate the oil filter housing on the top of the engine. Use the oil filter wrench to loosen and remove the old filter. Apply a thin layer of clean oil to the gasket of the new filter and tighten it securely.

4. Add New Oil: Using a funnel, add 5 quarts of 5W-30 oil to the engine. Check the oil level on the dipstick and ensure it’s between the “MIN” and “MAX” marks.

5. Reset the Oil Life Monitor: Start the engine and press the “MENU” button on the steering wheel. Select “INFO,” then “VEHICLE INFO.” Hold the “SET/CLR” button for three seconds to reset the oil life monitor.

Additional Tips:

• Use high-quality oil and filters to extend the life of your engine.
• Check the oil level regularly using the dipstick and top up as needed.
• Change the oil and filter every 3,000-5,000 miles or as indicated by the oil life monitor.
• Dispose of used oil and filters properly at designated recycling centers.

FAQs

What is the oil capacity of a 2013 Chevy Equinox with a 2.4-liter engine?

• 4.7 liters (5 quarts) of SAE 5W-30 oil