Engine Oil Capacity and Recommended Type

The 2018 Jeep Cherokee 2.4L engine requires 4.5 quarts (4.3 liters) of engine oil with the filter replaced, or 4.0 quarts (3.8 liters) without the filter. The recommended oil type is 5W-20, which provides optimal protection and performance for the engine. It is crucial to use the specified oil type to ensure proper lubrication and longevity of the engine components.

Importance of Regular Oil Changes

Neglecting regular oil changes can lead to severe engine damage. Over time, oil accumulates contaminants and loses its lubricating properties, leading to friction between engine parts. This friction can cause accelerated wear and tear, reduced fuel efficiency, and ultimately engine failure. Regular oil changes remove these contaminants and replenish the oil’s protective properties, extending the lifespan of the engine.

Warning Signs of Oil Problems

Ignoring oil-related issues can result in catastrophic consequences. If you notice any of the following signs, it is crucial to address them promptly:

• Burning oil smells
• Knocking or rattling noises from the engine
• Low oil levels on the dipstick
• Difficulty starting the vehicle
• Excessive engine wear or sludge buildup

DIY Oil Change Procedure

Changing the oil in your 2018 Jeep Cherokee 2.4L engine is a relatively simple task that can be performed at home. Here’s a step-by-step guide to help you:

Materials:

• 5 quarts of 5W-20 engine oil
• New oil filter
• Funnel
• Wrench
• Oil drain pan

Steps:

1. Park the vehicle on a level surface and engage the parking brake.
2. Locate the oil drain plug at the bottom of the oil pan and place the oil drain pan underneath.
3. Carefully loosen the oil drain plug and allow the oil to drain completely.
4. Replace the oil drain plug with a new washer and tighten it securely.
5. Locate the oil filter and remove it using an oil filter wrench.
6. Lubricate the o-ring of the new filter with clean oil and hand-tighten it onto the engine.
7. Pour 5 quarts of new oil into the engine using a funnel.
8. Start the engine and let it run for a few minutes.
9. Check the oil level using the dipstick and add more oil if necessary.
10. Reset the oil life indicator according to your vehicle’s owner’s manual.

Additional Tips:

• Dispose of used oil and the filter properly.
• Inspect the oil for signs of contamination or metal shavings.
• Change the oil and filter regularly as recommended in the owner’s manual.
• Always consult the owner’s manual for specific oil recommendations and maintenance intervals.

FAQ: 2018 Jeep Cherokee 2.4 Oil Capacity

What is the oil capacity of the 2018 Jeep Cherokee 2.4 L engine?

With the filter, it takes 4.5 quarts (4.3 liters) of oil. Without the filter, it takes 4.0 quarts (3.8 liters).

What type of oil is recommended for the 2018 Jeep Cherokee 2.4 L engine?

5W-20 oil is recommended for optimal performance.