The Service Side Detection System (SSDS) in the 2020 Chevy Equinox is an advanced safety feature designed to alert drivers of vehicles in their blind spots, reducing the risk of lane change collisions. The system utilizes sensors mounted on the vehicle’s rear bumper to detect approaching vehicles and illuminates a warning light in the corresponding side mirror.
How the SSDS Works
The SSDS operates by continuously monitoring the areas beside and behind the vehicle. When a vehicle enters the driver’s blind spot, the sensors detect its presence and send a signal to the BCM (Body Control Module). The BCM then illuminates the warning light in the side mirror, alerting the driver to the potential hazard.
Programming the SSDS
Prerequisites:
Vehicle with SSDS installed
Compatible diagnostic scan tool
Technician with programming experience
Procedure:
Connect the scan tool to the vehicle’s diagnostic port.
Select the Body Control Module (BCM) from the list of modules.
Enable the SSDS system in the BCM configuration.
Set the sensitivity level of the sensors (low, medium, high).
Calibrate the sensors by following on-screen instructions.
Perform a BSW test by driving at speeds above 30 mph and activating the turn signal.
Benefits of the SSDS
Enhanced Safety: Reduces the risk of collisions during lane changes by alerting drivers to vehicles in their blind spots.
Increased Awareness: Improves driver awareness of surrounding vehicles, reducing the likelihood of sudden lane changes.
Reduced Stress: Alleviates stress and anxiety associated with driving in traffic by providing advanced warning of potential hazards.
If the “Service Side Detection System” message appears, it indicates a fault in the system. The blind spot monitoring indicators will stay lit, and the system will be inoperative.
Possible Causes:
Malfunctioning sensor
Wiring issues
Software bugs
Recommended Actions:
Reset the system
Consult a qualified technician for diagnosis and repair
Ignoring the message poses a safety risk, as it impairs the driver’s visibility of other vehicles.
The Service Side Detection System in the 2020 Chevy Equinox is a valuable safety feature that enhances driver awareness and reduces the risk of collisions. By understanding the system’s operation, benefits, and potential issues, drivers can ensure its optimal performance and maximize its safety benefits.
Frequently Asked Questions (FAQs) Regarding Service Side Detection System in Chevy Equinox
Q1. What does the “Service Side Detection System” message indicate?
A1. It indicates a fault in the system, rendering the blind spot monitoring and rear cross traffic alert features inoperative.
Q2. Can resetting the system resolve the issue?
A2. Resetting may temporarily resolve the issue, but the fault may reoccur at startup.
Q3. What causes the fault?
A3. It could be due to a malfunctioning sensor, wiring problem, or software issue.
Q4. Why is it important to address the fault?
A4. Ignoring the fault poses a safety risk by reducing the driver’s visibility of other vehicles.
Q5. What is the purpose of the Side Detection System?
A5. To enhance safety by alerting drivers of vehicles in their blind spots, reducing the risk of lane change collisions and increasing driver awareness.
Enhanced safety, increased driver awareness, reduced stress and anxiety.
20 Key Points on Service Side Detection System
Message indicates a fault in the system, resetting may temporarily resolve the issue, fault may be due to malfunctioning sensor, wiring problem, or software issue, ignoring the fault may pose a safety risk, the system should be used in conjunction with other safety practices, the system is not a substitute for safe driving practices, drivers should be aware of the limitations of the system and drive accordingly.
