The Tire Pressure Monitoring System (TPMS) in a Chevy Silverado is a crucial safety feature that alerts drivers to low tire pressure, ensuring optimal vehicle performance and safety. When tire pressure drops below a certain threshold, the TPMS light on the dashboard illuminates, prompting the driver to take action.

Resetting the TPMS

After adjusting tire pressure or replacing a tire, the TPMS system must be reset to recalibrate the sensors and clear the TPMS light. The reset procedure for a Chevy Silverado is straightforward:

Method 1: Using the Vehicle Information Center (VIC)

1. Ensure tire pressure is correct in all four tires. This is essential to ensure accurate monitoring by the TPMS system.
2. Turn the vehicle’s ignition to the “ON” position. The engine does not need to be running.
3. Using the steering wheel controls, navigate to “Settings” > “Vehicle” > “Tire Pressure Monitor.” Follow the on-screen prompts to complete the reset.

Method 2: Using the TPMS Reset Button (Only for 2015-2019 models)

1. Locate the TPMS reset button on the driver’s side door frame. It is typically a small, recessed button.
2. With the vehicle running, press and hold the button for approximately 3 seconds. The horn will sound twice to confirm the reset.

Additional Notes:

1. Troubleshooting:

• If the TPMS light does not turn off after performing the reset procedure, there may be an issue with the TPMS system. Contact a qualified mechanic for assistance.
• If the TPMS light reappears after resetting, it may indicate a tire pressure issue that requires professional attention.

2. Tire Pressure Maintenance:

• Resetting the TPMS light does not fix underlying tire pressure problems. It is essential to inspect tires regularly and address any issues promptly, such as punctures or slow leaks.
• It is recommended to regularly check tire pressure and reset the TPMS light as needed to ensure optimal vehicle performance and safety.

By following these steps and adhering to the additional notes, you can effectively reset the TPMS tire pressure sensor in your Chevy Silverado and maintain optimal tire pressure for a safe and efficient driving experience.

FAQ: Resetting Tire Pressure Sensor on Chevy Silverado

How do I reset the tire pressure sensor on my Chevy Silverado?

1. Using the Vehicle Information Center (VIC)

   • Ensure tire pressure is correct in all tires.
   • Turn the ignition to “ON”.
   • Navigate to “Settings” > “Vehicle” > “Tire Pressure Monitor” > “Reset TPMS”.
   • Follow the on-screen prompts.

2. Using the TPMS Reset Button (2015-2019 models)

   • Locate the button on the driver’s side door frame.
   • With the vehicle running, press and hold the button for 3 seconds.
   • The horn will sound twice to confirm the reset.

Why is the TPMS light still on after I reset it?

• Incorrect tire pressure
• Tire pressure issue requiring professional attention

Does resetting the TPMS light fix tire pressure problems?

No, it only resets the system to monitor current tire pressure. It’s important to check tire pressure and address underlying issues promptly.

How often should I reset the TPMS light?

As needed, especially after adjusting tire pressure or replacing a tire.