The 2019 Ram 1500 is a popular pickup truck known for its rugged capabilities and comfortable interior. However, some owners have reported issues with the sun visors becoming loose or drooping. This problem can be frustrating and can affect the vehicle’s safety.

Causes of Sun Visor Issues

The sun visors in the 2019 Ram 1500 are attached to the vehicle by a swivel hinge mechanism. Over time, this mechanism can become worn or damaged, causing the visor to become loose. This can lead to several symptoms, including:

• Difficulty adjusting the visor position
• Visor not staying in place
• Visor drooping or falling down

DIY Sun Visor Repair

If you are experiencing issues with your 2019 Ram 1500 sun visor, you can attempt to repair it yourself following these steps:

Tools Needed:

• 5/32″ Allen key
• T-25 Torx bit
• Replacement visor clips (optional)

Steps:

1. Remove the Visor: Use the Allen key to remove the screw at the bottom of the visor and pull it straight down to detach it.
2. Remove the Hinge Cover: Use the Torx bit to remove the two screws on the hinge cover and lift it off.
3. Inspect and Replace Clips: Examine the two clips that hold the swivel mechanism together. If they are broken or damaged, replace them with new clips.
4. Reassemble the Hinge: Align the hinge mechanism and insert the new clips into their slots. Replace the hinge cover and tighten the screws.
5. Reinstall the Visor: Slide the visor up to engage the hinge pins and insert the Allen key to tighten the screw.

Permanent Repair for Loose Visors

If the problem persists after repairing the hinge mechanism, you may consider a permanent solution:

1. Drill a Hole: Drill a 1/8″ hole through the hinge casing and into the swivel mechanism.
2. Insert a Screw: Insert a small self-tapping screw into the hole to secure the swivel in place.
3. Reassemble and Install: Reassemble the visor and reinstall it on the vehicle.

Additional Tips

• Handle the visor with care to avoid further damage.
• Check for any loose screws or damaged components if the visor is particularly loose.
• If the repair is beyond your comfort level, seek professional assistance.

By following these steps, you can effectively repair or permanently fix a broken sun visor in your 2019 Ram 1500. This will restore the functionality of the visor and improve the safety and comfort of your driving experience.

How do I replace the sun visor on my 2019 RAM 1500?

1. Insert an Allen key into the screw on the bottom of the visor and turn counterclockwise.
2. Pull the visor straight down to detach it from the vehicle.
3. Use a Torx bit to remove the two screws on the hinge cover (located on the back of the visor).
4. Lift off the cover.
5. Inspect the two clips that hold the swivel mechanism together. If they are broken or damaged, replace them with new clips.
6. Align the hinge mechanism and insert the clips into their slots.
7. Replace the hinge cover and tighten the screws.
8. Position the visor on the vehicle and slide it up to engage the hinge pins.
9. Insert the Allen key into the screw and tighten clockwise.

How can I permanently repair the sun visor on my 2019 RAM 1500?

If the visor hinge continues to fail, a permanent solution can be implemented:
1. Drill a 1/8″ hole through the hinge casing and into the swivel mechanism.
2. Insert a small self-tapping screw into the hole to secure the swivel in place.
3. Reassemble the visor and reinstall it.

What tools do I need to replace the sun visor on my 2019 RAM 1500?

• 5/32″ Allen key
• T-25 Torx bit
• Replacement visor clips (optional)

Where can I find the sun visor hinge cover on my 2019 RAM 1500?

The sun visor hinge cover is located on the back of the visor.